Application Guide: Specialty Cleaners
What You Need Before You Begin:
✅Product appropriate for the type of mess, surface, or equipment
✅Clean water for dilution (when applicable) and rinsing
✅Dilution: Choose the correct dilution ratio for the level of cleaning
✅Application Equipment: A separate quart-sized sprayer to mix the dilution and apply to small areas. Some cleaners may be used with sponge, towel, or mop applications. Some may even be used in mechanical or high-pressure cleaning systems.
✅PPE recommended, such as gloves and safety glasses
✅It is recommended to work in a well-ventilated space
Steps:
- Site Prep: May sweep or brush away loose debris not adhering to surfaces before applying cleaning product. May lightly agitate or scrub surface for heavier grime, dirt, or residue.
- Prepare the cleaner by transferring the product to an appropriate applicator.
- Follow dilution rates (where applicable) according to the table below. Mix dilution in the applicator.
- Spray the product or solution to surfaces evenly
- In most cases, allow the solution to sit and work for 1 to 2 minutes.
- Wipe or rinse the area clean as desired
- Repeat treatment as needed until surface is clear of the mess
Product | Primary Use / Messes Cleaned | Dilution Rate |
MG Degreaser | Heavy grease, grime, oils, and carbon buildup on non-porous surfaces | 1:10 to 1:128 with water |
B-New | Excess mortar, stucco, and dried concrete on stone, brick, and concrete surfaces | Use undiluted or up to 1:10 with water |
C-New | Oils, dirt, and general residue from concrete | Use undiluted |
AR-3600 | Asphalt and tar removal from metal, tools, and equipment | Use undiluted |
NeutraClean | General surface cleaning – dust, light grime, and mild residues | 1:64 with water |
A+ Clean | Versatile cleaner for medium-duty soils, oils, and grime | 1:3 to 1:64 with water |
VetraClean | Ready-to-use cleaner for soils, grime, and residues on non-porous surfaces | Use undiluted |
FirstChoice | Light-duty cleaner for dust, dirt, and minor residues | 1:64 with water |
HC-3600 | Waterless hand-cleaner for oil and greasy residue | Use undiluted |
Cleanup and Storage
- Return any unused product back to the manufacturer's container and seal tightly.
- May keep any remaining diluted solutions in a separate sealed container, clearly labeled, for future use.
- Store concentrate products sealed in a cool, dry area out of direct sunlight or freezing temperatures
- Mix fresh solution for each use when possible
Need Help?
📞 Contact BioSpan support or scan your QR code on the label for how-to videos and tech support.
🌐 Visit biospantech.com for specs, SDS, and more.